KEY POINTS
- Four preinstalled extra-thick 140 x 28 mm fans deliver up to 115 CFM of airflow and 3 mmH2O of static pressure for high-performance cooling
- Compatible with BTF and ATX motherboards, 360 mm AIO coolers, graphics cards up to 407 mm long and USB 20 Gbps Type-C®
- Interchangeable side panels, detachable top panel and enhanced cable routing provide a premium PC DIY building experience
SINGAPORE, March 11, 2024 — ASUS today announced the TUF Gaming GT302 ARGB chassis, a case that makes it easy to build a high-performance PC with great cooling. Prepped and ready for great out-of-the-box cooling, equipped for wide compatibility with high-performance parts, and thoughtfully constructed inside and out for an easy PC DIY experience, the GT302 ARGB resets expectations for a mainstream case.
Great cooling ― right out of the box
Most PC builders go big on cooling to ensure an excellent balance of performance and quiet operation. From the moment it is pulled out of the packaging, the TUF Gaming GT302 ARGB gives users a superb foundation for high-end cooling. This starts with a front panel designed first and foremost to maximize airflow efficiency. It is constructed of a wide-open, high-porosity square-type mesh that leaves ample room for fresh air to enter a PC. Four pre-installed 140 mm ARGB case fans move cool air through the chassis. These fans are exceptionally thick, measuring 28 mm in depth. These fans deliver up to 3 mmH2O static pressure and 115 CFM airflow for excellent cooling with quiet operation.
The TUF Gaming GT302 ARGB also has enough elbow room to install a large liquid-cooling radiator of up to 360 mm. The top panel is fully detachable, so it’s easy to install and clean the radiator.
Wide compatibility
Not all mid-tower chassis are designed with the space to accommodate larger components, which can be a problem for builders with a taste for high-end GPUs.
With the TUF Gaming GT302 ARGB, the options are wide open. Its two-way PCIe® mount can be used to install a graphics card in a horizontal orientation ― up to 407 mm long. That is long enough to handle even the mighty ROG Strix GeForce RTX 4090. If a user opts for a vertical orientation, cards up to 125 mm thick can be installed.
Bigger motherboards are on the menu, too. The GT302 ARGB can fit motherboards all the way up to extra-large E-ATX boards (up to 12 x 10.9 inches). Or, for users looking to install a large array of storage drives, the GT302 ARGB’s versatile storage drive brackets make it a breeze. With each of these brackets, users can install an HDD and an SSD at the same time, allowing for a mixture of two 2.5-inch SSDs and two 3.5-inch HDDs using only two brackets.
Ready for a BTF build
The new ASUS ecosystem of Back-To-The-Future (BTF) PC components lets users easily build a PC that tucks the cables out of sight for a tidy look — made possible by new motherboards that hide their connectors on the back side rather than the front. For the most part, standard PC DIY components will work with a BTF motherboard, but users will need a compatible chassis. The TUF Gaming GT302 ARGB motherboard tray will work with standard motherboards, but it also includes the cutouts needed to access the connectors on a BTF motherboard.
Even if users are not getting the GT302 ARGB for a BTF build, the extensive cable management options will be appreciated. A roomy 37 mm of space is devoted to routing cables. The cable grommet bar is built with three large straps that make it easy to route two sets of cables. Additionally, three small clips on the rear side panel help to route the 8-pin cable for the CPU.
Easy building experiences
The TUF Gaming GT302 ARGB’s detachable top panel, wide component compatibility and cable management options are just a few of many ways that it streamlines the PC building process. Even simply accessing internal components is easy, thanks to the tool-free side panels. The TUF Gaming GT302 ARGB also has a unified front I/O header for plugging in all cables at once.
Convenient connectivity
The TUF Gaming GT302 ARGB case offers conveniences that go far beyond the building process. It is designed for comfortable everyday use as well. A rich selection of ports on the front panel makes it easy to connect a headset and other peripherals. The USB Type-C® port on the front is wired for speed — install a motherboard with a USB 20 Gbps Type-C header to put exceptional transfer speeds within arm’s reach.
Clean style in two colors
Some chassis options take center stage with bold, brash designs. Others are content to let the other components of a build be the stars of the show. The TUF Gaming GT302 ARGB follows this second path. Its regular geometry and clean lines give it a straightforward style that is easy to match with just about any component on the market.
The GT302 ARGB is available in either black or white. Unlike some competing white models that use the same wires and cables as their black counterparts, the GT302 ARGB uses white cables for the case fans and front I/O so that users can enjoy a harmonious, unified look. With either color option, users will get flexibility with the looks of their PC thanks to the interchangeable side panels. One panel contains a tempered glass window, and the other contains mesh, and users can put them on whichever side of the chassis they wish.
Availability & Pricing
These are the availability and pricing of the ASUS TUF Gaming GT302 ARGB chassis:
| Model | Availability | Pricing |
TUF GAMING GT302 CASE – WHITE |
Early May 2024 | $209 |
TUF GAMING GT302 CASE – BLACK |
Early May 2024 | $199 |
TUF Gaming GT302 ARGB product page: https://www.asus.com/motherboards-components/gaming-cases/tuf-gaming/tuf-gaming-gt302-argb/
Product video: https://www.youtube.com/watch?v=d-0XzAHfwjA
SPECIFICATIONS[i]
ASUS TUF Gaming GT302 ARGB
| Motherboard Compatibility | E-ATX (up to 12″ x 10.9″), ATX, Micro-ATX, Mini-ITX |
| Dimensions | 235 x 520 x 485 mm |
| Materials | Steel, Tempered Glass, ABS Plastic |
| I/O Ports | 2 x USB 5 Gbps 1 x USB 20 Gbps (Type-C®) 1 x Headphone + Microphone |
| 3.5″/2.5″ Drive Bays | 2 |
| 2.5″ Drive Bays | 2 |
| Expansion Slots | 8 |
| Vertical Expansion Slots | 3 |
| Maximum GPU Length | 407 mm |
| Maximum CPU Cooler Height | 165 mm |
| Maximum PSU Length | 220 mm |
| Radiator Compatibility | Front: 140 / 280 mm Top: 120 / 140 / 240 / 280 / 360 mm Rear: 120 / 140 mm |
| Cooling Support | Front: 3 x 140 mm Top: 3 x 140 mm / 3 x 120 mm Rear: 1 x 140 mm / 1 x 120 mm |
| Pre-installed Fans | Front: 3 x 140 mm ARGB PWM Fan Rear: 1 x 140 mm ARGB PWM Fan |
| Removable Dust Filters | Front / Top / Bottom |
| Cable Routing | 37 mm |
[i] Specifications, content and product availability are all subject to change without notice and may differ from country to country. Actual performance may vary depending on applications, usage, environment and other factors. Full specifications are available at http://www.asus.com
